Midas Siena Specifications download pdf (Page 22)

Master Section: Stereo Master & Monitoring ControlsMaster Section: Stereo Master & Monitoring Controls

Operators Manual - Page 20

left

right

stereo

talk mic

left

right

master meters

solo meters

generator

frequency

mono sum

direct input

direct to

masters

local

auto mute

1-2

5-6

7-8

3-4

5-1

3-1

121-1

9-1

phones

masters

add

clear

monitor

input output

talk gain

input / output

input

talk

ext

talk

auto

mute

masters

S0011

masters

mono

500

NEUTRIK

MUTE MUTE MUTE

SOLO

SOLO SOLO MUTE

MUTE

SOLO

PFL PFL

MUTE

generator

frequency

direct input

direct to

masters

500

SOLO

MUTE

generator

frequency

direct input

direct todirect to

masters

500

SOLO

MUTE

Direct Input Master Controls

In addition to the console's input channels, Siena features a

single stereo direct input (line level) which may be added to

any of the 16 mix bus outputs or stereo master.

A common application is to use the direct input as a stereo

effects return. For example, you may be using an auxiliary

send to feed signals to an external reverberation unit. Connecting the reverb return to the direct input allows you to

add reverb back to each of your artist's monitor sends, without needing to use an additional pair of input channels

for this purpose.

The direct input is a stereo line level feed available on the rear panel of the master section. It features its own input

level control, solo and mute facilities as follows:

Direct Input Level The direct input

level provides continuous adjustment of

input level from off (-inf) to +20dB. Use

this control to set the optimum input

level for the stereo direct input.

Mute MUTEThe switch mutes the direct

input cutting off all feeds except to the

PFL bus. The mute status is indicated by

the corresponding mute LED.

Solo SOLOThe switch routes the direct

input signal onto the mono PFL and

stereo AFL busses. The solo status is

indicated by the solo LED.

Direct to Masters When depressed,

this switch routes the stereo direct input

to the master stereo bus, via the Direct

to Masters level control.

Direct to Masters Level This level

control sets the level of the direct input

applied to the stereo master bus when

the Direct to Masters switch is

depressed. Level may be adjusted from

off (-inf) to +6dB.

Note: the to controls

located above the mix bus output master

faders adjust the amount of direct input

signal added to the each of the 16 mix

busses. For more details on these

controls, please refer to Page 16.

direct 1 direct 16

Tone Generator (Oscillator)

The Siena provides an internal tone generator which may be routed to any of the console's 16 mix bus and stereo

master outputs.

When enabled, the output of the tone generator is added to the talk bus where it may be combined with the

console's talk mic and external talk inputs. The combined signals are then routed to any of the bus masters using

the 'talk to mix' and 'talk to masters' switches located in the Talkback section.

Note: to route only the tone generator to a mix bus output or stereo master, without talkback, make sure that both

the and switches are disabled.talk on talk ext

Frequency The output frequency of the

generator is continuously variable from

50Hz to 5kHz allowing the user to test,

for example, three or four bands of a

crossover system.

Generator Level The level of the

generator output is continuously

variable from off (-inf) to +10dB.

Generator On Enables the tone

generator.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 49 50

Comments to this Manuals

No comments

Midas Siena Specifications Page 22

Comments to this Manuals

Related products and manuals for Audio mixers Midas Siena