Midas PRO Series Specifications download pdf (Page 16)

B-8 Chapter 2: Internal Effects

Midas Digital Consoles

Addendum B

Vintage room

The vintage room reverb effect provides an incredibly natural sounding reverb in the

style of the earliest digital reverberators that became popular during the 1980s. Its

strength is in recreating natural acoustic ambiences with a very warm and dense

characteristic without sounding particularly artificial.

Reflective surface materials and air absorption properties can be simulated by adjusting

the high and low frequency cut amount. Low frequency decay and cross-over

parameters allow relative control over the low band reverb tail length. This can be used

to either simulate real room responses, which often have a longer decay time at low

frequencies or alternatively can be useful to reduce low frequency energy in a live

environment where it may already be present due to the natural reverberation of the

venue. High frequency decay and cross-over parameters provide additional control

over the high band reverb tail length.

Enabling the global tap option will change the pre-delay parameter units from

milliseconds to musical note durations as they do the current effect units.

7 output meter Two adjacent 11-LED columns — one each for left and

right — comprise the output meters.

8 hf cut control

knob

High frequency cut control knob applies a 6dB/Oct

low pass filter to the input signal, in the range 200Hz

to 20kHz.

9 lf cut control knob Low frequency cut control knob applies a 6dB/Oct

high pass filter to the input signal, in the range 10Hz

to 500Hz.

10 hf damp control

knob

High frequency damping, progressively reduces the

high frequency content over time, in the range 1kHz

to 20kHz.

11 lf decay control

knob

Adjusts the ratio of decay for low frequency content,

between 0.5 and 2.0.

12 diffusion control

knob

Increases the density of both the early reflections and

reverb tail, between 0 and 100%.

13 decay control

knob

Adjusts the decay time relative to the room size, from

minimum to maximum.

14 size control knob Specifies the room size (also affects decay), from

small to large.

15 pre delay control

knob

Specifies the time before the reverb begins, between

0ms and 200ms.

Item Element Function

14 13 12 11 10 9 8 7

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 51 52

Comments to this Manuals

No comments

Midas PRO Series Specifications Page 16

Comments to this Manuals

Related products and manuals for Audio mixers Midas PRO Series