Midas PRO Series Specifications download pdf (Page 33)

Dynamic EQ internal effect B-25

Midas Digital Consoles

Addendum B

11 FIXED button and

LED indicator

Forces selected band to use a fixed EQ gain, so that

when it is enabled it behaves as a static EQ. This is

useful for previewing the effect of the EQ curve.

12 RATIO control

knob

Sets the ratio of the compression or expansion

applied to the selected band. The centre position

produces a ratio of 1:1, which will have no effect. As

the control is turned anti-clockwise, more

compression is applied, up to a ratio of 25:1. If the

control is turned clockwise from the centre position,

expansion is gradually applied up to the ratio of 1:25.

13 FAST REL. button

and LED indicator

Enables fast envelope release setting.

14 FREQ control knob Sets the centre frequency of the selected EQ band.

15 BELOW button

and LED indicator

Sets whether the compressor/expander operates

above (off) or below (on) the threshold (see Figure 1

“Transfer characteristics” on page 26).

16 THRESHOLD

control knob

Sets the threshold level.

17 Meter Shows the level of the sidechain signal relative to the

threshold setting, that is, it shows the signal level

within the frequency region selected by the frequency

(FREQ) and width (WIDTH) controls.

18 Band I/O Shows the audio routing path between inputs,

outputs and the four EQ bands.

Item Element Function

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 51 52

No comments

Midas PRO Series Specifications Page 33