Midas PRO Series Specifications download pdf (Page 17)

Vintage room B-9

Midas Digital Consoles

Addendum B

Item Element Function

1 input meter Two adjacent 11-LED columns — one each for left and

right — comprise the input meters.

2 lf x-over control

knob

Adjusts the cross-over frequency for the low

frequency decay.

3 hf x-over control

knob

Adjusts the cross-over frequency for the high

frequency decay.

4 in switch Switches the Vintage Room reverb effect in/out.

5 audition button This momentary-action button triggers a short

internally generated sound to aid reverb evaluation

(as a check).

6 output meter Two adjacent 11-LED columns — one each for left and

right — comprise the output meters.

7 hf cut control

knob

High frequency cut control knob applies a 6dB/Oct

low pass filter to the input signal, in the range 200Hz

to 20kHz.

8 lf cut control knob Low frequency cut control knob applies a 6dB/Oct

high pass filter to the input signal, in the range 10Hz

to 500Hz.

9 hf decay control

knob

Adjusts the ratio of decay for high frequency content,

between 0.1 and 1.0.

10 lf decay control

knob

Adjusts the ratio of decay for low frequency content,

between 0.1 and 10.0.

11 density control

knob

Increases the reflection density of the reverb tail,

between 0 and 100%.

12 decay control

knob

Adjusts the decay time relative to the room size, from

minimum to maximum.

13 size control knob Specifies the room size (also affects decay), from

small to large.

14 pre delay control

knob

Specifies the time before the reverb begins, between

0ms and 200ms.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Comments to this Manuals

No comments

Midas PRO Series Specifications Page 17

Comments to this Manuals

Related products and manuals for Audio mixers Midas PRO Series