Midas XL8 DL431 Specifications download pdf (Page 31)

DL431 Mic Splitter

Operator Manual

Chapter 5: Programming Mode

This chapter describes the programming mode of the DL431 Mic Splitter.

In programming mode the four programming buttons in the control panel are used to

navigate and select options from a number of menus (see “Menus” on page 16), which

let you set up the unit and view information.

Menu navigation

The four programming buttons in the control panel have the following functions.

The menu flowchart (see “Menu flowchart (menus 1 to 5)” on page 14 and “Menu

flowchart (menus 6 and 7)” on page 16) gives an overview of all the menus and their

options, and shows you how to navigate your way around them. When navigating the

menus, note that: menus are shown on the left, and each subsequent lower level of

each menu is to the right; an asterisk * (lower-right corner) means that the option is

not the currently selected one; and flashing options (far left character) are currently

selected.

>> To enter/exit programming mode

To enter programming mode from any menu display screen, press the MENU button

and hold down for approximately two seconds; the default display will change to the

“Select Menu:” display (see display A on page 14).

To exit programming mode, press MENU repeatedly until you reach the default screen.

The DL431 Mic Splitter will exit programming mode automatically after about

20 seconds of inactivity, that is, if none of the programming buttons are pressed within

that time.

>> To select a menu

In the “Select Menu:” display, scroll to the menu you want by using the up/down arrow

buttons; its number will flash to show that it is currently selected. Then, press

SELECT.

Navigation buttons Usage

Moves up a menu level. Exits programming mode,

depending on the current menu level.

Depending on menu level, moves down a menu level

or selects the current option. In menu “5 AES50

Status”, clears the AES50 status settings.

Scrolls through the current level of menus/options.

Scrolls through the current level of menus/options in

the opposite direction to the up arrow button.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 79 80

No comments

Midas XL8 DL431 Specifications Page 31