Midas XL8 DL431 Specifications download pdf (Page 45)

DL431 Mic Splitter

Operator Manual

Appendix C: Technical Specification

This appendix contains the technical specifications specific to the DL431 Mic Splitter.

For full technical specifications for the XL8 Live Performance System, see the owner’s

manual (part number DOC02-XL8).

Due to a policy of continual improvement, Midas reserves the right to alter the function

or specification at any time without notice.

General specifications

Inputs and outputs

Analogue inputs

Dimensions 6U x 410 mm deep

Net weight 21.5 kg

Power requirements 100V to 240V, 50 to 60Hz

Operating temperature range +5°C to +40°C

Storage temperature range -20°C to +60°C

Connector 3-pin XLR balanced

Phantom power 48-volt with local switch and remote control

from XL8 control centre

Gain control A -2.5dB to +45dB analogue gain in 2.5dB steps

with local and remote control; plus a further

±20dB of hi resolution interpolated DSP trim

Gain control B Independent second channel identical to above

Filter A 30Hz high pass with local defeat switch and

remote control from XL8 control centre

Filter B Independent second channel identical to above

Meter (24-off) 7-segment, -18dBu to +24dBu

Meter A/B Meters can be switched to monitor A or B

pre-amplifiers

A/D converter A 24-bit, 96k and 128 times over sampling

A/D converter B Independent second channel identical to above

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 79 80

No comments

Midas XL8 DL431 Specifications Page 45